李自立 发表于 2011-4-7 21:23

热成型不能求解

热成型不能求解，提交后显示错误

李自立 发表于 2011-4-7 21:25

kofkiller 发表于 2011-4-8 11:01

有没有更多的错误提示、

yanstill 发表于 2011-4-9 13:42

检查所有曲线，未定义点的都删掉，或者定义好。一般是HC有问题

李自立 发表于 2011-4-21 19:30

*** ERROR *** FLEXTS: MF_HEAT NOT SUPPORTED

   *** ERROR *** OCCURRED IN FLEXLM LICENSE

   *** ERROR *** OCCURRED IN INPUT PHASE, SEE ABOVE

李自立 发表于 2011-4-21 19:30

License Manager Warning (-18)

Warning -18 = License server system does not support this feature.
Feature:       MF_HEAT
License path:C:\flexlm\pam_lmd.lic;
FLEXnet Licensing error:-18,147
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
***********************************************************************


   *** ERROR *** FLEXTS: MF_HEAT NOT SUPPORTED

   *** ERROR *** OCCURRED IN FLEXLM LICENSE

   *** ERROR *** OCCURRED IN INPUT PHASE, SEE ABOVE

kofkiller 发表于 2011-4-22 08:37

很明显是LIC问题

李自立 发表于 2011-4-22 10:06

大哥
这要咋解决啊？
我毕业设计就靠这啊
急死了

李自立 发表于 2011-4-22 10:06

大哥
这要咋解决啊？
我毕业设计就靠这啊
急死了

李自立 发表于 2011-4-22 10:10

*** INFO *** CHARACTERISTIC LENGTH OF 2-D ELEMENTS =   0.3136E+01

*** ERROR *** THERMAL CONTACT HAS BEEN SPECIFIED BETWEEN die / blank AND blank
FOR A PURE MECANICAL SIMULATION

*** ERROR *** THERMAL CONTACT HAS BEEN SPECIFIED BETWEEN holder / blank AND blank
FOR A PURE MECANICAL SIMULATION

*** ERROR *** THERMAL CONTACT HAS BEEN SPECIFIED BETWEEN punch / blank AND blank
FOR A PURE MECANICAL SIMULATION

   *** ERROR *** OCCURRED IN INPUT PHASE, SEE ABOVE
页: [1] 2
查看完整版本: 热成型不能求解