成型论坛

标题: 求各位大神指导小弟，练习自带实例3回弹补偿时Aborted [打印本页]

作者: wanglieliang 时间: 2013-11-3 20:19
标题: 求各位大神指导小弟，练习自带实例3回弹补偿时Aborted
完全按照应用手册做的实例3，在回弹补偿运算时刚一会就Aborted,运算信息如下：求大神指导一二，万分感激！！！
expanding memory to    2819551
expanding memory to    2849048

Memory required to process keyword    :    2849048
contracting memory to          1 end of keyword reader

LS-DYNA will perform a structural only analysis


                     ls-dyna ls971s.50638 R4.2 date 02/04/2009
*** Warning reset D3PLOT output interval from 0. to 5.0000E-03
expanding memory to       2209 material, node and element data
expanding memory to       2284 material properties
expanding memory to    36743 element data
expanding memory to    50910 gradient of damage data
expanding memory to    219462 user control for contact interfaces
expanding memory to    219464 for boundary cond. vectorization
expanding memory to    224398 arbitrary element numbering input

*** Warning warpage angle of element 24 is 9.0007E+01 degrees

*** Warning warpage angle of element 25 is 9.0007E+01 degrees

*** Warning warpage angle of element 26 is 9.0007E+01 degrees

*** Warning warpage angle of element 27 is 9.0007E+01 degrees

*** Warning warpage angle of element 29 is 9.0007E+01 degrees

*** Warning warpage angle of element 36 is 9.0007E+01 degrees

*** Warning warpage angle of element 38 is 9.0007E+01 degrees

*** Warning warpage angle of element 50 is 9.0007E+01 degrees

*** Warning warpage angle of element 56 is 9.0007E+01 degrees

*** Warning warpage angle of element 57 is 9.0007E+01 degrees

*** Warning warpage angle of element 59 is 9.0007E+01 degrees

*** Warning warpage angle of element 69 is 9.0007E+01 degrees

*** Warning warpage angle of element 70 is 9.0007E+01 degrees

*** Warning warpage angle of element 71 is 9.0007E+01 degrees

*** Warning warpage angle of element 72 is 9.0007E+01 degrees

*** Warning warpage angle of element 76 is 9.0007E+01 degrees

*** Warning warpage angle of element 77 is 9.0007E+01 degrees

*** Warning warpage angle of element 78 is 9.0007E+01 degrees

*** Warning warpage angle of element 79 is 9.0007E+01 degrees

*** Warning warpage angle of element 80 is 9.0007E+01 degrees

*** Warning warpage angle of element 81 is 9.0007E+01 degrees

*** Warning warpage angle of element 85 is 9.0007E+01 degrees

*** Warning warpage angle of element 86 is 9.0007E+01 degrees

*** Warning warpage angle of element 87 is 9.0007E+01 degrees

*** Warning warpage angle of element 92 is 9.0007E+01 degrees

*** Warning warpage angle of element 93 is 9.0007E+01 degrees

*** Warning warpage angle of element 94 is 9.0007E+01 degrees

*** Warning warpage angle of element 100 is 9.0007E+01 degrees

*** Warning warpage angle of element 101 is 9.0007E+01 degrees

*** Warning warpage angle of element 102 is 9.0007E+01 degrees

*** Warning warpage angle of element 103 is 9.0007E+01 degrees

*** Warning warpage angle of element 106 is 9.0007E+01 degrees

*** Warning warpage angle of element 110 is 9.0007E+01 degrees

*** Warning warpage angle of element 111 is 9.0007E+01 degrees

*** Warning warpage angle of element 112 is 9.0007E+01 degrees

*** Warning warpage angle of element 115 is 9.0007E+01 degrees

*** Warning warpage angle of element 116 is 9.0007E+01 degrees

*** Warning warpage angle of element 117 is 9.0007E+01 degrees

*** Warning warpage angle of element 126 is 9.0007E+01 degrees

*** Warning warpage angle of element 129 is 9.0007E+01 degrees

*** Warning warpage angle of element 130 is 9.0007E+01 degrees

*** Warning warpage angle of element 133 is 9.0007E+01 degrees

*** Warning warpage angle of element 141 is 9.0007E+01 degrees

*** Warning warpage angle of element 142 is 9.0007E+01 degrees

*** Warning warpage angle of element 144 is 9.0007E+01 degrees

*** Warning warpage angle of element 148 is 9.0007E+01 degrees

*** Warning warpage angle of element 151 is 9.0007E+01 degrees

*** Warning warpage angle of element 163 is 9.0007E+01 degrees

*** Warning warpage angle of element 177 is 9.0007E+01 degrees

*** Warning warpage angle of element 181 is 9.0007E+01 degrees

*** The above message exceeds 50 times
   Further printing will be suppressed
   You can change the limit at field 4 of card 2 of *CONTROL_OUTPUT


*** Warning element ID    862 is a very badly
   shaped element-possibly unstable.  Possible,
   reason for error termination.

*** Warning element ID    862 is a very badly
   shaped element-possibly unstable.  Possible,
   reason for error termination.

*** Error element ID    863 has a zero normal vector.

E r r o r t e r m i n a t i o n

s t o r a g e a l l o c a t i o n

Memory required to complete solution :    2849048
Additional dynamically allocated memory:    207569
                                 Total:    3056617

T i m i n g i n f o r m a t i o n
                     CPU(seconds) %CPU  Clock(seconds) %Clock
  ----------------------------------------------------------------
  Initialization ....... 0.0000E+00 0.00    0.0000E+00 0.00
  Element processing ... 0.0000E+00 0.00    0.0000E+00 0.00
  Binary databases ..... 0.0000E+00 0.00    0.0000E+00 0.00
  ASCII database ....... 0.0000E+00 0.00    0.0000E+00 0.00
  Contact algorithm .... 0.0000E+00 0.00    0.0000E+00 0.00
  Contact entities ..... 0.0000E+00 0.00    0.0000E+00 0.00
  Rigid bodies ......... 0.0000E+00 0.00    0.0000E+00 0.00
  Implicit Nonlinear ... 0.0000E+00 0.00    0.0000E+00 0.00
  Implicit Lin. Alg. ... 0.0000E+00 0.00    0.0000E+00 0.00
  ----------------------------------------------------------------
  T o t a l s          0.0000E+00 0.00    0.0000E+00 0.00

Problem time    = 0.0000E+00
Problem cycle    =       0
Total CPU time    =       0 seconds ( 0 hours  0 minutes  0 seconds)
CPU time per zone cycle  =       0 nanoseconds
Clock time per zone cycle=       0 nanoseconds

Number of CPU's 1
NLQ used/max    96/ 96
Start time 11/03/2013 19:30:18
End time    11/03/2013 19:30:21
Elapsed time    3 seconds(  0 hours  0 min.  3 sec.) for    0 cycles

E r r o r t e r m i n a t i o n

作者: wanglieliang 时间: 2013-11-3 20:20
不能沉了啊，各位大神有没有遇到过这种情况，指教啊

作者: kofkiller 时间: 2013-11-4 10:22
*** Error element ID 863 has a zero normal vector.

863单元有问题，检查一下吧

作者: wanglieliang 时间: 2013-11-4 13:51

kofkiller 发表于 2013-11-4 10:22
*** Error element ID 863 has a zero normal vector.

863单元有问题，检查一下吧

谢谢论坛元老指导，我先研究研究怎么查看指定单元，刚学好多不懂

作者: xiyuwu 时间: 2013-11-19 11:36
查找一下就可以找到了，

欢迎光临成型论坛 (https://bbs.formingcn.com/)